× Close
Quick Links:
Main Navigation:

TruSense® S310 Sensor

Quote

Product List

Submit Request

TruSense® S310 Sensor

Description:

Lidar sensor for liquid target measurements. Comes equipped with an alignment laser. The Ruggedized Enclosure is an explosion-proof accessory which allows the laser sensor to be rated to meet ATEX and other explosion-proof standards. It is ideal for applications that require Class 1, Div 1 explosion-proof protection.

SKU: 7006805

Overview

Overview

Specifically engineered for non-contact fluid level measurement, these sensors directly measure fluids that are calm or turbulent, and regardless of their dielectric properties. An ideal solution for the measurements needed in applications such as Water and Wastewater, Chemicals Processing, and Food and Beverage industries. The S300 sensors can easily integrate with your product solutions by using the OEM versions.

A choice of I/O formats makes the TruSense series very adaptable for your specific installation.

The S300 series of laser sensors are up to the challenge and ready to provide accurate and repeatable results in the world of fluid level measurement.

TruSense S300 Series Laser Sensors Offer Advantages Like No Other:

  • Provides instantaneous measurements that are very accurate, even over long ranges
  • Avoids false echoes by creating a beam with virtually no spread that can be shot through narrow spaces or small-diameter stilling wells
  • Installs at the top of a well for easy mounting, access and maintenance
  • Saves time with little to no required calibrations

Key Specifications:

Minimum Range = 1.5 ft (46 cm)
Maximum Range = 164 ft (50 m)
Typical Accuracy +/- 10 mm (.39 in)
Data Output Rate = 1 Hz to 15 Hz, Dynamic Mode averaging from 2 to 30 seconds; Static Mode averaging from .5Hz to 14Hz
Target Modes = First, strongest, last
Measurement Modes = Static Mode, Dynamic Mode
Measurement Filters = Dynamic Mode: Low Pass Filter, Median Filter
Wavelength = 905 nm (near IR)
Divergence = 3 mrad (equal to 15 cm beam diameter @ 50 m or .5 ft @ 164 ft) 44 mrad using Diffusing Lens (equal to 220 cm beam diameter @ 50 m or 7.33 ft @ 164 ft)
Baud Rate Min/Max = 9,600 / 230,400
Input Power = 12 – 24 VDC
Current Draw = Measuring = 1.8 Watts, Standby = .48 Watts
Dimensions ( L x W x H) = 4.11 x 3.22 x 1.64 in (104.4 x 81.7 x 41.6 mm)
Weight = OEM = 2.7 oz (76 g)
Eye Safety = Class 1, 7 mm (FDA, CFR21) Class 1 (IEC 60825 – 1 : 2001)
Shock/Vibration = MIL-STD-810
Moisture = IP65
Operating Temperature = – 20° to 140° F (- 28° to 60° C)
NOTE: All specifications are subject to change without notice.